| Tape load and thread to ready: | 10–27 sec
| 15–24 sec
| 19 sec
|
| Average file access time (first file): | 86-96 sec
| 64 –75 sec
| 72 sec
|
| Maximum/average rewind time: | 110/55-142/71-152/76 sec
| 98/49–104/52-103/51 sec
| 98/49 sec
|
| Unload time: | 13–15 sec
| 13–19 sec
| 19 sec
|
| Data transfer rate, native (uncompressed): | 15–16 MB/sec
| 32–35 MB/sec
| 80 MB/sec
|
| Data transfer rate (compressed): | 30–32 MB/sec
| 60–70 MB/sec
| 160 MB/sec
|
| * The actions of the tape drive can be divided into four distinct phases: |
|
|
|
| Phase 1: Load time – the amount of time required to insert a cartridge in the drive, load the tape and prepare to read, write or search.: |
|
|
|
| Phase 2: Average file access time – the amount of time required to search from the beginning of the tape to the mid-point; does not include load time.: |
|
|
|
| Phase 3: Maximum rewind time – the amount of time required to rewind the tape from the end to the beginning of the tape. : |
|
|
|
| Phase 4: Unload time – the amount of time required to eject the cartridge from the drive.: |
|
|
|
| The average rewind time is the time to rewind a tape from the mid-point to the beginning or one-half of the maximum rewind time.: |
|
|
|
| Capacity, native (uncompressed): | 100 GB
| 200 GB
| 400 GB
|
| Power on: | 250,000 hr @ 100% duty cycle
| 250,000 hr @ 100% duty cycle
| 250,000 hr @ 100% duty cycle
|
| Head life: | 30,000 hr
| 60,000 hr
| 60,000 hr
|
| Uncorrected bit error rate: | 1x10(-17)
| 1x10(-17)
| 1x10(-17)
|
| Undetected bit error rate: | 1x10(-27)
| 1x10(-27)
| 1x10(-27)
|
| Interface: | Single port Ultra 2 SCSI
| Single port Ultra 3 SCSI
| Ultra 320 SCSI
|
| Burst transfer rate: | LVD 80 MB/sec, HVD 40 MB/sec
| LVD 160 MB/sec
| 320 MB/sec
|
| Channel rate (Fibre Channel): | 100 MB/sec (maximum instantaneous) (F)
| 200 MB/sec (maximum instantaneous)
| 200 MB/sec (maximum instantaneous)
|
| Interface (Fibre Channel): | NL_Port, FC-PLDA (hard and soft AL-PA capability), FC-AL, FCP-2, FC-TAPE
| Single, Dual, N_ and NL _Port, FC-PLDA (Hard and soft AL _PA capability), FC-AL-2, FCP-2, FC-Tape
| FC-PI, FC-FS, FC-FL A, FC-GS-3, FC-AL-2, FCP-2, FC-Tape, FC-FLA
|
| Read/write compatibility interface: | Ultrium proprietary format
| Ultrium 2, Ultrium proprietary format (read only)
| Ultrium 3, Ultrium 2, Ultrium 1 (read only) proprietary format
|
| Emulation modes: | LTO Ultrium 1
| LTO Ultrium 2, Ultrium proprietary format (read only)
| LTO Ultrium 3
|
| Height: | 3.25 (8.25 cm)
| 3.25 (8.25 cm)
| 3.25 in (8.25 cm)
|
| Depth: | 8.0 in (20.3 cm)
| 8.0 in (20.3 cm)
| 8.0 in (20.3 cm)
|
| Temperature (operating): | +50° to +104° F (+10° to +40° C )
| +50° to +100° – +104° F (+10° to +38°– +40° C)
| +50° to +104° F (+10° to +40° C)
|
| Temperature (non-operating): | -40° to +150° F (-40° to +66° C )
| -40° to +139° – +150° F (-40° to +66° C)
| -40° to +150° F (-40° to +66° C)
|
| Relative humidity (operating): | 20%–80%
| 20% –80%
| 20% –80%
|
| Relative humidity (non-operating): | 10%–95%
| 10% –95%
| 10% –95%
|
| Voltage (L20, L40, L80): | + 5 VDC, + 12 VDC
| + 5 VDC, + 12 VDC
| varies depending on library specifications
|
| Voltage (L180, L700e): | 100-240 VAC @ 50-60 Hz
| 100–200 VAC @ 50–60 Hz
|
|
| Voltage (L5500): |
| 220–240 VAC @ 50–60 Hz
|
|
Printable version 
More
Information 
)
)
